If you plan to use the Cube GPS to track a vehicle we recommend using our Hardwire Charging kit. Using this kit you can wire the GPS directly to the battery in your vehicle and never worry about charging again. The kit will not allow the GPS to drain the battery of the vehicle, if the battery in the vehicle drops below 11.5V the charger will shut off.
This is ideal for theft recovery. Hard wire the GPS and hide the tracker in the vehicle where it is not visible. If a thief would see the charger and remove it the Cube GPS will continue to track using it's built in battery.
Another option for hardwiring is the OBD II Charger. This allows you to plug into the OBD port under the drivers side dash without doing any wiring. One drawback to this method is the charger is more visible to a thief.
Setting up for vehicle tracking
- Select the GPS tracker in the list
- Select the gear in the top right corner of the app
- Select working mode in the settings
- Select Car
- When finished press the arrow in the top left of the app to go back
Now you can track your vehicle to see where it goes, how long it spends there, and at what speed it travels.